On radon mitigation install day, a crew sets up a pipe and fan system that pulls radon from under your home and sends it outside. The job starts with a walk through, then moves to drilling, sealing, running the pipe, and turning on the fan. Most air systems are finished in one visit, and the crew checks that the fan is working before they leave. At RI Affordable Radon Systems, we have done these installs in Rhode Island and eastern Connecticut since 2009. Here is what your day will look like, step by step.
How Should You Get Your Home Ready?
A little prep makes the day go faster. The crew needs room to work in your basement and a clear path to the spot where the pipe will go out of the house. You do not need to leave home, and most families go about their day. If you have pets, it helps to keep them in another room while the crew drills.
- Clear a few feet of space around the basement floor and walls where you talked about the pipe going.
- Move cars or items away from the outside wall if the pipe will run outdoors.
- Make sure the crew can reach the attic if the fan is going up there.
- Have your test results handy so the crew can see where you started.
What Happens When the Crew Arrives?
The day starts with a quick walk through of your home. The crew looks at your basement floor, your foundation, and any sump pit. Then they confirm where the suction point, pipe, and fan will go. This is the best time to ask questions or say where you want the pipe to stay out of sight.

How Is the Radon System Put In?
Most homes get a system called sub-slab depressurization. That is a long name for a simple idea. A pipe pulls air from under your basement floor, and a fan pushes it out above your roof. Here is how licensed radon mitigation system installers build it.
- Drill the suction hole. The crew cuts a round hole in the concrete floor and digs out a small pocket of soil under it.
- Seal the floor. We will seal if a price has been agreed to or if levels remain elevated. Because many basements are cluttered with belongings, it’s sometimes a good DIY task.
- Run the pipe. PVC pipe goes into the hole and is sealed tight at the floor. It can run through a closet, up through the attic, or along the outside wall.
- Mount the fan. The fan goes in the attic or outside, never in the living space, so it does not push radon into your home.
- Vent above the roof. The pipe ends above the roofline, away from windows and doors.

Will the Pipe and Fan Stick Out?
We work hard to keep systems tidy. Inside, pipes can be routed through closets, and fans can be put in the attic. Outside, the pipe can look like a gutter downspout, and we paint it to match your house. During the walk through, tell the crew which spots matter most to you.

What Happens Before the Crew Leaves?
Once the fan is on, the crew checks the U-tube gauge on the pipe. When the liquid sits at two different heights, the fan is pulling air from under the floor. They also listen to the fan and look over every seal. Before they go, they show you how to read the gauge so you can check it yourself.
The crew cleans up the dust from drilling, too. Our fans have a five year warranty, and our workmanship has a lifetime warranty. Our prices are set by the fan size and the number of suction points. That way, you know what you are paying for before the day starts.
How Do You Know the System Is Working?
The only way to know your new level is to test again. The CDC says to retest after a radon system goes in to make sure it is working. We do not do formal Radon Testing, because we install systems and it would be a conflict of interest to test our own work. For an official result, like for a home sale, use a certified radon tester. If you just want peace of mind, we help homeowners run their own air and water tests the right way.

Conclusion
Radon mitigation install day is simple. The crew walks through, drills a suction hole, seals the floor, runs the pipe, and sets the fan. Then they check the gauge, clean up, and show you how the system works. Most air systems are done in a single visit, and you can stay home the whole time. If you are looking for a radon company near me in Rhode Island or eastern Connecticut, reach out to RI Affordable Radon Systems for a free estimate.
Frequently Asked Questions
How long does a radon mitigation install take?
Most air systems are put in during a single visit. The time depends on your foundation, how many suction points you need, and where the pipe runs. A home with a simple layout goes faster than one with more than one slab. You can read more in our post on how long radon installation takes.
Do I need to be home during the install?
It is best to be home for the walk through at the start. That is when you agree on where the pipe and fan will go. After that, you can stay or step out. The crew will show you how to read the gauge when they finish.



